Lenovo ThinkSystem ST650 V3 - Front Operator Panel Leds

Figure 10. Drive LEDs
LED Description
1 Drive activity
LED (green)
Each hot-swap drive comes with an activity LED. When this LED is flashing, it indicates that the
drive is in use.
2 Drive status
LED (yellow)
The drive status LED indicates the following status:
• The LED is lit: the drive has failed.
• The LED is flashing slowly (once per second): the drive is being rebuilt.
• The LED is flashing rapidly (three times per second): the drive is being identified.
Front operator panel LEDs
This section contains information about the front operator panel LEDs.
32
ThinkSystem ST650 V3 System Configuration Guide