Lenovo ThinkSystem ST650 V3 - Page 54

• Consumable and Structural parts: Purchase and replacement of consumable and structural parts is
your responsibility. If Lenovo acquires or installs a structural component at your request, you will be
charged for the service.
Table 15. Parts listing
Index
Description
Tier 1 CRU Tier 2 CRU FRU
Consumable
and Structural
parts
For more information about ordering the parts shown in
Figure 16 “Server components” on page 45:
http://datacentersupport.lenovo.com//products/servers/thinksystem/st650v3/7d7a/parts
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner
before purchasing any new parts.
1
Power distribution board
√
2
Power distribution board cover
√
3
Expansion drive cage
√
4
Optical drive cage and 5.25-inch drive
bay adapter
√
5
Front I/O module
√
6
EIA brackets
√
7
Tape/Optical drive filler cover and
tape/optical drive filler
√
8
5.25-inch optical disk drive
√
9
5.25-inch LTO/RDX tape drive
√
10
2.5-inch drive
√
11
3.5-inch drive tray with 2.5-inch to 3.5-
inch drive adapter
12
3.5-inch hot-swap drive
√
13
3.5-inch storage drive filler (single bay)
√
14
3.5-inch storage drive filler (four bays)
√
15
2.5-inch hot-swap drive
√
16
2.5-inch storage drive filler (single bay)
√
17
2.5-inch storage drive filler (eight bays)
√
18
Bracket kit (drive retainer and PCIe
bracket)
√
19
Security door
√
20
Front bezel
√
21
3.5-inch hot-swap drive backplane
√
22
2.5-inch hot-swap drive backplane
√
23
Foot stand
√
46 ThinkSystem ST650 V3 System Configuration Guide