Chapter 3.Reference information
This section contains monitor specications, instructions to manually install the monitor
driver, troubleshooting information.
Monitor specications
Chapter 3. 3-1
Table3-1.Monitorspecificationsfortype-model60AF-HAR1-WWWide
Dimensions Height
Depth
Width
379.4 mm (14.94in.)
167.2 mm (6.58 in.)
514.5 mm (20.26 in.)
Panel Size
Backlight
Aspect ratio
21.5 in.
LED
16:9
Stand Tilt Range: -5
o
~22
o
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size
Maximum height
Maximum width
Pixel pitch
546.68 mm (21.5 in.)
268.11 mm (10.56 in.)
476.64 mm (18.77 in.)
0.248 mm (0.01 in.) (V)
Power input Supply voltage
Max supply current
90-264VAC (100~240VAC+/-10%)
1.5 A
Power consumption
Note: Power
consumption figures
are for the monitor
and the power supply
combined.
Normal operation
Standby/Suspend
Off
Note: without USB/
Webcam/external speaker
< 22 W
< 0.5 W (Analog), < 0.5W (Digital)
< 0.5 W at 100Vac & 240Vac
Video input (Analog) Input signal
Horizontal addressability
Vertical addressability
Clock frequency
Analog Direct Drive, 75 ohm 0.7V
1920 pixels (max)
1080 lines (max)
205 MHz
Video input (DVI) Interface
Input Signal
Horizontal addressability
Vertical addressability
Clock frequency
DVI
VESA TMDS (Panel Link
TM
)
1920 pixels (max)
1080 lines (max)
165 MHz
Communications VESA DDC CI
Supported Display
Modes
Horizontal frequency
Vertical frequency
30 kHz - 83 kHz
50 Hz - 75 Hz
Native Resolution 1920x1080 at 60 Hz
Temperature Operating
Storage
Shipping
0
o
to 45
o
C (32
o
to 113
o
F)
-20
o
to 60
o
C (-4
o
to 140
o
F)
-20
o
to 60
o
C (-4
o
to 140
o
F)
Humidity Operating
Storage
Shipping
10% to 80% non-condensing
5% to 95% non-condensing
5% to 95% non-condensing