Lenovo ThinkVision S25e-30

Questions and Answers

M
Michael McguireAug 9, 2025
What to do if Lenovo ThinkVision S25e-30 shows amber and no images are displayed?
- A
  Anna GrossAug 9, 2025
  If your Lenovo Monitor's power indicator is amber but there are no images, the video signal cable might be loose or disconnected. Ensure the video cable is securely connected to both the system and the display. Also, the display's brightness and contrast settings might be at their lowest. Adjust these settings in the OSD menu to see if the image appears.
A
Amanda HicksAug 14, 2025
What to do if Lenovo ThinkVision S25e-30 Monitor screen is blank and the power indicator shows amber?
- K
  Kayla SalazarAug 14, 2025
  If the screen of your Lenovo Monitor is blank and the power indicator is amber, the display might be in standby or hang-up mode. To resolve this, press any key on the keyboard or move the mouse to resume operation. Also, check the power options settings on your computer to ensure they are properly configured.
J
jordansnyderAug 19, 2025
How to fix poor image quality on Lenovo ThinkVision S25e-30?
- B
  Bryan RobersonAug 19, 2025
  If you are experiencing poor image quality on your Lenovo Monitor, check the following: First, ensure the video signal cable is securely plugged into both the display and the system. Second, the color setting may be incorrect; select another color setting in the OSD menu. Finally, perform automatic image setup, as the automatic image setting function may not have been performed.
F
Faith JacobsAug 25, 2025
How to fix blurred lines or images on Lenovo Monitor?
- L
  lindaleeAug 25, 2025
  To fix blurred lines or images on your Lenovo Monitor, adjust the system's resolution setting to the display's resolution: 1920x1080 @60 Hz. Also, perform the automatic image setting; if it doesn't work, perform the manual image setting. Adjusting the Dots Per Inch (DPI) setting on the system can further improve the image.
B
barbara95Aug 28, 2025
Why Lenovo Monitor power indicator does not light up?
- E
  Edwin WilcoxAug 29, 2025
  The Lenovo Monitor's power indicator might not light up due to several reasons. First, ensure the display's power switch is turned on. Check if the power cord is securely connected to both the monitor and the outlet. Verify that the outlet has electricity. If the issue persists, try changing the power cord or using a different power outlet.
S
shawkatherineSep 3, 2025
How to fix "Out of Range" error on Lenovo Monitor?
- R
  Rachel GloverSep 3, 2025
  The "Out of Range" message on your Lenovo Monitor indicates that the display mode set by the system is not supported. If you replaced an old display, reconnect it and adjust the display mode to the range supported by the new display. If you are using a Windows system, restart the system in safe mode and select a supported display mode for your computer.

Lenovo ThinkVision S25e-30 Specifications

General

Screen Size	24.5 inches
Panel Type	VA
Resolution	1920 x 1080
Refresh Rate	75 Hz
Response Time	4 ms
Brightness	250 cd/m²
Contrast Ratio	3000:1
Aspect Ratio	16:9
Viewing Angle	178°/178°
Color Gamut	72% NTSC
Ports	1x HDMI 1.4, 1x VGA, 1x 3.5mm audio out
VESA Mount Compatible	Yes (100 x 100 mm)