Getting Started
12
Lenovo 3000 G400 and G410 User Guide
i Novo button
This button functions as a reset button; use with caution. Press the
Novo button to enter the main interface of OneKey Recovery while the
power is off. You can use OneKey Recovery to restore the primary
hard disk partition (usually drive C) back to the factory default
configuration, including the operating system and the software on it.
Attention: Once done, the system can no longer return to its previous
state. All data on the primary hard disk partition (usually
drive C) will subsequently be lost. So make sure all
important files on the primary hard disk partition have
been backed up onto another hard disk or USB hard disk
drive before this operation.
For details, see “OneKey Recovery4.65 User Guide”.
Note: If your computer is in hibernation, you may not enter the
OneKey Recovery by pressing the Novo button. Press the Power
button to enter the operation system, shut down your computer
first to use the Novo button.
When your computer is running Windows Vista™, and if you have the
EnergyCut program installed, you can shift the power schemes by
pressing the Novo button.
j Custom button
With the preinstalled software, once you press the button, a dialog
window appears to allow you to define the button with the
applications listed, so that you can recall the application instantly by
pressing this custom button.
k Mute button
Press this button to turn on or off the sound.
l Touch pad
Move your fingertip across the touch pad to move the cursor.
m Touch pad button
The two buttons of the touch pad function as the left and right buttons
of the mouse.
n Microphone (built-in)
The built-in microphone can be used for video conferencing, voice
narration, or simple audio recordings.
Lenovo EVEREST UG.book Page 12 Friday, August 17, 2007 5:40 PM
To Next Page
Loading...
Need help?
General