Replacing CRUs 27
Completing the parts replacement
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect
the cables.
To reinstall the computer cover and reconnect the cables to your computer, do the following:
1
Ensure that all components have been reassembled correctly and that no tools or loose screws are
left inside your computer.
2
Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables
clear of the hinges and sides of the computer chassis to avoid interference when reinstalling the
computer cover.
3
Install the computer cover.
4
Install the computer stand. For details, see Replacing the monitor stand or Replacing the UltraFlex II
Stand.
5
Place the computer in an upright position.
6
If a locking device is available, use it to lock the computer.
7
Reconnect the external cables and power cords to the corresponding connectors on the computer.
To Next Page
Loading...
Need help?
General
