Lenoxx CD114BL - Copying MP3;WMA Files; Copying Single Tracks

Programming tracks for playback
&RS\LQJRI03:0$ÀOHV
Up to 64 tracks can be programmed for MP3/WMA file playback in any
order. Before programming, however, be sure the system is in STOP mode.
1. Set the function selector to CD/USB/SD mode, then press the stop
button.
2. Press the program PROG button, MEM will be flashing on the LCD
display, and it will indicate the program number and digits for the track
number to be programmed.
3. Press the SKIP UP or SKIP DOWN button to select a desired track.
4. Press the program PROG button to store the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory.
6. When all desired tracks have been programmed, press the PLAY/PAUSE
button to play the tracks in the assigned order.
7. To cancel programming, press the STOP button twice.
The system allows you to copy files from USB to SD/MMC or vice versa.
You can copy a single file/track, a folder of files/tracks, or all files/tracks
on the storage medium.
Copying a single file/track
1. Insert a USB storage device and SD/MMC card, then select USB/SD
mode (as described previously).
2. Press the record REC button during playback of the track you want to
copy. “ONE” will be flashing on the display. Press the record REC button
again to confirm.
3. The USB or SD icon will be flashing on the display while the system is
copying the file.
4. Once the file has been copied, the unit will stop playback automatically.
“END” will be shown on the display and the system will revert to USB or
SD mode.