Bluetooth input
Bluetooth input encoding
Clock
1. Press the BT button and set the unit to Bluetooth mode. Long-press the BT
button if you’re pairing with a new device for the first time.
2. Turn on the Bluetooth feature of your device, search for “CD114” and
pair.
3. Play and stream music from your device to the unit.
NOTE:
If an external audio device is connected to the AUX IN socket, playing of the
auxiliary device takes priority over Bluetooth input and cassette playback.
Make sure your Bluetooth device and the unit are within15 meters of each
other.
If you have trouble connecting, check and see if there are other Bluetooth
devices nearby interfering with the signal and connection.
1. When playing music via Bluetooth input, press the record REC button, it
will take 3 - 4 seconds to read the memory device, then the USB or SD
icon will be flashing on the display.
2. The system will start the encoding mode after a few seconds. During
encoding, the USB or SD icon will be flashing on the display.
3. To finish encoding, press the stop button. The display will show “END”
and return to Bluetooth mode.
In standby mode, long-press PROG button to change between 24H/12H
clock format. When 24H/12H is flashing on the display, you can pick your
prefered format by short-pressing Forward/Rewind buttons. Short-press
PROG button to set. The numbers on the clock will blink. Using the Tuning
knob, set the hour, press PROG to confirm, then repeat to set the minutes.
To Next Page
Loading...
