2 Information LH100 V3
Welcome!
Congratulations for purchasing the Digital plus by Lenz
®
hand
held controller LH100-V3. We wish you much enjoyment with
using this model train control system.
The LH100 hand held controller is the universal data input device
in the Digital plus by Lenz
®
system. With it you can:
- operate your locomotives
- assemble, operate, and disassemble locomotives operated as
double headers
- use smart-consisting to assemble, operate, and disassemble
multi-unit consists.
- throw turnouts and set signals or activate uncoupling tracks
- read out system configurations and redefine them
- read out information from feedback encoders and feedback
capable accessory decoders
- program locomotive and accessory decoders as well as
feedback devices
This operation manual is intended to make using the LH100 easy
for you. To get started, first read the section “First Steps". After
you have understood the basic locomotive control, you can
familiarize yourself with the full range of functions of this hand
held controller step by step and put them to use.
If you should have any questions that are still unanswered after
you work your way through this information, then we will be glad
to help you further. You can contact us in the following ways:
Europe North America
Postal
address:
Lenz Elektronik GmbH
Huettenbergstrasse 29
D-35398 Giessen
Lenz Agency
PO Box 143
Chelmsford, MA 01824
Phone ++49 (0) 6403 900 133 ++1 978 250 1494
Fax ++49 (0) 6403 900 155 ++1 978 455 LENZ
Email info@digital-plus.de support@lenz.com
Do you have everything?
Please check if everything is included in the box:
Hand held controller LH100
Operation manual (this booklet)
If an item is missing, please contact your retailer to have the
missing item replaced.
To Next Page
Loading...
