5
l
1 Features of the 530 series of controllers
The 530 series of controllers series comprises 4 half-controlled single-quadrant
controllers with output powers from 0.36 kW to 2 kW for the operation of DC
shunt or permanent magnet motors.
• Compact single-board controllers for space-saving installation on a mounting
plate or DIN rail 35 x 7.5 mm
• Easy connection through screwless, vibration-proof plug and socket
connectors
• Protective cover prevents accidental contact of live components
• Operation with tacho or armature voltage feedback with "I x R compensation"
• Operational integrity even under mains voltage fluctuations and short-term
mains failure because of static and dynamic voltage monitoring
• Interference immunity from bad mains wave-form because of synchronizing
filter and channel separation of the firing pulses
• Compliance with the EC directive for the design of a CE-conform drive
system
To Next Page
Loading...
Need help?
General
