Lenze 7812 - Page 22

ET4 6/fa checked: 19.04.89 MB 33.0831 GB
page: 21
Functlon code 14
Using the tunction code 14 a minimum speed ot 0% to 75% ot the
maximum frequency which is set via tunction code 10, can be
proqrainned at the inverter. This prograinining does not result
in an inetteotive range ot the set-value potentiometer, but only
in a higher resolution ot speed adjustment.
vo!ue IO/o)
Function code 15
The tunction code 15 allows tor an output fre~uency limitation at 150
Hz in orderto protect the motor and machine.
Data code FIT: treguency limitation at 150 Hz
1.
1000/.
Data code 01 : no freguency limtation