Lenze 9200 Series - Page 48

44

Change of the ratio denominator.
For codes with more than 5 digit values, the keypad operation is
different: In the parameter level, the cursor can be shifted to enter
large values. This is done by pressing SH+
▲
and SH+
▼
.
1. enter code C033 using
▼
or
▲
keys
-Arrow for code level-
↓
-Code no.- -value- -exponent-
>C033 1. 000E- 01
Rat i o denomi nat .
-Explanatory text-
2. change from code level to parameter level using the PRG key
-Arrow for parameter level-
↓
C033>
0. 1000
-10-digit value-
↑
-Cursor-
3. position the cursor using the keys
▲
+ SH
C033>
0. 1000
4. enter value using the key
▼
or
▲
C033>
0. 3000
5. acknowledge with SH + PRG and return to the code level
>C033 3. 000E- 01
Rat i o denomi nat .