Glossary
Meaning of the signal names
2
Guide
2.2
2.2.2
L
2.2-6
EDS82EV903-1.0-11/2002
MCTRL1-MSET
MCTRL1-torque s etpoin t
Torque setpoint or torque limiting value
MCTRL1-MSET1 MCTRL1-torque setting 1
Torque threshold 1
MCTRL1-MSET1=MACT MCTRL1 -torque setting 1= actual torque
Torque threshold 1 is reached
MCTRL1-MSET2 MCTRL1-torque setting 2
Torque threshold 2
MCTRL1-MSET2=MACT MCTRL1 -torque setting 2= actual torque
Torque threshold 2 is reached
MCTRL1-NOUT MCTRL1-speed output
Output frequency
MCTRL1-(1/NOUT) MCTRL1 -(1/speed outpu t)
Output signal 1/C0050
MCTRL1-NOUT+SLIP MCTRL1-speed output + slip
Output frequency with slip compensation
MCTRL1-PHI-ADD MCTRL1 -additional phase
Additional phase
MCTRL1-VOLT MCTRL1-voltage
Motor voltage
MCTRL1-VOLT-ADD MCTRL1-additional voltag e
Additional motor voltage
MPOT1 Motor potentiometer 1
Motor potentiometer 1
MPOT1-DOWN MPOT1-down
Setpoint is driven to minimum output frequency at main setpoint
deceleration ramp
MPOT1-INIT MPOT1-in itialis ation
Configuration motor potentiometer
MPOT1-QSP MPOT1-quickstop
Activation of quickstop via motor potentiometer
MPOT1-OUT MPOT1-output
Motor potentiometer output
MPOT1-UP MPOT1-up
Setpoint is driven to maximum output frequency at main
setpoint acceleration ramp
NSET1 Speed setting 1
Function block speed setting
NSET1-JOG1/3 NSET1-activation of fixed setpoint 1 or 3
Activates fixed setpoint (JOG) 1 or 3
NSET1-JOG1/3/5/7 NSET1-activation of fixed setpoint 1, 3, 5 or 7
Activates fixed setpoint (JOG) 1, 3, 5 or 7
NSET1-JOG2/3 NSET1-activation of fixed frequency 2 or 3
Activates fixed setpoint (JOG) 2 or 3
To Next Page
Loading...
Need help?
General