Need help?Do you have a question about the Lenze E82ZAFSC001 and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Model | E82ZAFSC001 |
| Manufacturer | Lenze |
| Input Voltage | 24 VDC |
| Protection Class | IP20 |
| Operating Temperature | 0°C to +55°C |
| Relative Humidity | 5% to 95% (non-condensing) |
Details conventions like decimal separator and page references used in the documentation.
Explains pictographs and signal words for dangers and important information like 'Danger!' and 'Note!'.
Describes the function of the module for controlling Lenze frequency inverters and PLCs with analog/digital signals.
Specifies the intended use of the function module with specific Lenze basic devices and industrial power systems.
Lists the items included in the product package, such as the function module, screw driver, sticker, and mounting instructions.
Explains how to identify the product's product range, generation, variant, and hardware version.
Provides detailed specifications for input/output signals, load capacity, and input resistance for terminal connections.
Gives guidelines for wiring to ensure electromagnetic compatibility, such as separating cables and grounding shields.
Details terminal data, electrical connections, possible cable types, tightening torque, and bare end length.
Provides crucial pre-checks and notes before powering up the device, including configuration settings.
Explains the function of each DIP switch and its corresponding setting for different signal ranges and C0034 parameter.
Outlines the sequential steps for commissioning the device, including switching on, setting inputs, providing setpoints, and releasing the controller.
To Next Page