3 Product description
Function
EDK82ZBC DE/EN/FR 3.1
42
-H1-prod_key
3 Product description
Function
You can use the keypad to communicate with the standard Lenze devices.
You can
ƒ set parameters
ƒ control (e.g. disable and enable)
ƒ display operating data
ƒ stipulate setpoints
ƒ transfer parameter sets to other standard devices
Note!
You can connect the keypad to the standard device or remove it from the
standard device even while the drive is running.
Application as directed
The automation module ...
ƒ is an accessory that can be used with the following standard Lenze devices:
Product range Name of device From hardware version
upwards
Frequency inverter
8200 vector Vx1x
8200 motec Vx1x
Motor starter starttec xx02
ƒ is a device intended for use in industrial heavy-current installations.
Any other use is regarded as inappropriate!
Accessories needed
E82ZWLxxx connecting cable (only for hand terminal and installation in door)
To Next Page
Loading...