Lenze EVF8214-EV020 - Default Chapter; Table of Contents

Contents
821XKlimaBA0399 i
1 Preface and general information 1-1...........................
1.1 About these Operating Instructions ... 1-1.......................
1.1.1 Terminology used 1-1...............................
1.1.2 Changes in these Operating Instructions 1-1................
1.2 Scope of delivery 1-1.....................................
1.3 Legal regulations 1-2.....................................
2 Safety information 2-1......................................
2.1 General safetyinformation 2-1...............................
2.2 Layout of the safety information 2-3...........................
2.3 Residual hazards 2-4.....................................
3 Technical data 3-1.........................................
3.1 General data/application conditions 3-1.........................
3.2 Rated data (Operation with 120 % overload) 3-2...................
3.2.1 Operating conditions 3-2.............................
3.2.2 Types 8211 to 8214 3-2.............................
3.2.3 Types 8215 to 8218 3-4.............................
3.3 Rated data (Operation with 150 % overload) 3-5...................
3.3.1 Types 8211 to 8214 3-5.............................
3.3.2 Types 8215 to 8218 3-6.............................
3.4 Fuses andcable cross-sections 3-7...........................
3.4.1 Single driveswith 120 %overload 3-7....................
3.4.2 Single driveswith 150 %overload 3-8....................
3.5 Analog plug-in module 3-9.................................
3.5.1 Features 3-9.....................................
3.6 Dimensions 3-10.........................................
3.6.1 Controller dimension 3-10.............................
3.6.2 Analog plug-in module 3-10............................
4 Installation 4-1............................................
4.1 Mechanical installation 4-1.................................
4.1.1 Important notes 4-1.................................
4.1.2 Standard assembly with fixing rails or fixing angles 4-3.........
4.1.2.1 Types 8211 to 8214 4-3......................
4.1.2.2 Types 8215 to 8218 4-4......................
4.1.3 DIN-rail assembly 4-5...............................
4.1.4 Assembly of analog plug-in module 4-6...................
4.2 Electrical Installation 4-7...................................
4.2.1 Important notes 4-7.................................
4.2.2 Power connections 4-8..............................
4.2.2.1 Mains connection 4-8........................
4.2.2.2 Motor connection 4-8........................
4.2.2.3 Connection diagram 4-11.......................
4.2.3 Control connections 4-12..............................
4.2.3.1 Control cables 4-12...........................
4.2.3.2 Assignment of the control terminals 4-12............
4.2.3.3 Connection diagrams 4-14......................
4.2.3.4 Connection diagrams of analog plug-in modules 4-15....
4.3 Installation of a CE-typical drive system 4-16......................
Show/Hide Bookmarks