Lenze EVF9326 User Manual

Visit us on the web:
www.servo-repair.com
www.servorepair.ca
www.ferrocontrol.com
www.sandvikrepair.com
www.accuelectric.com
For 24/7 repair services :
USA: 1 (888) 932 - 9183
Canada: 1 (905) 829 -2505
Emergency After hours: 1 (416) 624 0386
Servicing USA and Canada
Scroll down to view your document!
Over 100 years cumulative experience
24 hour rush turnaround / technical support service
Established in 1993
The leading independent repairer of servo motors and drives in North America.

Lenze EVF9326 Specifications

General

Brand	Lenze
Model	EVF9326
Category	DC Drives
Language	English

Summary

2 Safety instructions

2.1 General safety and application notes for Lenze controllers

Essential safety guidelines for handling and installing Lenze controllers.

2.2 General safety and application instructions for Lenze motors

Safety guidelines for the installation, connection, and operation of Lenze motors.

2.3 Residual hazards

Identifies potential hazards associated with the equipment and necessary precautions.

4 Installing the basic device

5 Wiring the standard device

5.2 Basics for wiring according to EMC

Guidelines for optimal wiring practices to ensure electromagnetic compatibility.

5.9 Control connections

5.9.1 Important notes

6 Commissioning

6.1 Before switching on

Essential checks and preparations before powering up the controller.

6.2 Selection of the control mode

Guidance on choosing between V/f characteristic and vector control modes.

6.3 Parameter setting with the XT EMZ9371BC keypad

Step-by-step examples for parameter setting using the XT keypad.

6.5 Changing the assignment of the control terminals X5 and X6

6.6 Adjusting the motor

Procedures for entering motor data and adjusting motor parameters.

6.7 Setting the speed feedback

6.8 Operating mode

6.10 Acceleration, deceleration, braking, stopping

Configuration of motion control parameters including speed range and ramps.

6.11 Optimising the operating behaviour

8 Configuration

8.3 Code table

A comprehensive reference table for all configurable codes and their settings.

9 Troubleshooting and fault elimination

9.2 Troubleshooting

Guidance on interpreting LED status and analyzing errors using the history buffer.

9.3 Drive performance in case of errors

9.4 Error elimination

Provides causes and remedies for common drive malfunctions and error messages.

9.5 Resetting error messages

11 Safe standstill

11.1 Important notes

Covers safety functions, requirements, and additional safety instructions.

11.3 Connecting relay KSR

Details on the electrical reference point and connection of the safety relay KSR.

11.4 Functional test

Procedures for checking the 'safe standstill' function, including manual and automatic tests.