About this documentation
Document history
1
5
EDKVF93−03 EN 2.0
1 About this documentation
Note!
This documentation contains all the information required by the machine
operator to run the drive controllers of the 9300 vector series installed in your
machine/system.
You may make further use of the information contained in this documentation
without asking Lenze for permission if you do not change the contents.
1.1 Document history
What is new / what has changed?
Material number Version Description
.B&m 2.0 03/2010 TD14 New edition due to reorganisation of the company
UL−warnings updated
Revision for software version 8x
13217738 1.0 07/2007 TD23 First edition
Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
1.2 Target group
This documentation is intended for qualified personnel according to IEC 364.
Qualified, skilled personnel are persons who have the qualifications necessary for the work
activities to be undertaken during the assembly, installation, comissioning, and operation
of the product.
efesotomasyon.com - Lenze
To Next Page
Loading...
Need help?
General
