Lenze EVS9323-EK User Manual

Function block library
7-46

SHB9300CRV EN 2.0
Function
This FB is controlled via a binary input. Depending on the input signal, different signals are sent to
the output:
l If a HIGH signal is applied at the binary input, the signal which is applied at the ASWx-IN2
input is sent to the output.
l If a LOW signal is applied, the signal which is applied at the ASW-IN2 input is sent to the
output.
Show/Hide Bookmarks

Lenze EVS9323-EK Specifications

General

Brand	Lenze
Model	EVS9323-EK
Category	DC Drives
Language	English