Configuration
7-270
SHB9300CRV EN 2.0
7.7.3.22 Fault in the resolver driver H06
Purpose
Protects the controller.
Function
This monitoring is effective if a control type with history buffer is used. It does not provide an
additional binary output.
Thismessagewillbegenerated if afault occurs intheresolverdriverduring mainsconnection.Please
contact Lenze.
Resetting is only possible by mains switching.
Features:
l
LECOM no.: 106
l
Reaction: TRIP (unchangeable)
To Next Page
Loading...