Preface and general information
1-4

SHB9300CRV EN 2.0
1.4.3 EC Low Voltage Directive
(73/23/EEC)
amended by: CE Mark Directive (93/68/EEC)
General
l
The Low Voltage Directive is effective for all electrical equipment for use with a rated voltage
between 50 V and 1000V V AC and between 75 V and 1500 V DC and with normal ambient
conditions.The use of e.g. electrical equipment in explosive atmospheres and electrical parts
in passenger and goods lifts are excepted.
l
The objective of the Low Voltage Directive is to ensure that only electrical equipment which
does not endanger the safety of persons or animals is placed on the market. It should also be
designed to conserve material assets.
1.4.3.1 EC Declaration of Conformity ’95
for the purpose of the EC Low Voltage Directive (73/23/EEC)
amended by: CE Mark Directive (93/68/EEC)
The 93XX controllers are developed, designed, and manufactured in compliance with the above
mentioned EC directive under the sole responsibility of
Lenze GmbH & Co KG, Postfach 10 13 52, D-31763 Hameln
Considered standards:
Standard
DIN VDE 0160 5.88 +A1 / 4.89 +A2 / 10.88
EN 50178
Classification VDE 0160 / 11.94
Electronic equipment for use in electrical power installations
DIN VDE 0100 Standards for the erection of power installations
EN 60529 IP Degrees of protection
IEC 249 / 1 10/86, IEC 249 / 2-15 / 12/89 Base material for printed circuits
IEC 326 / 1 10/90, EN 60097 / 9.93 Printed circuits, printed boards
DIN VDE 0110 /1-2 /1/89 /20/ 8/90 Creepage distances and clearances
Hameln, 01 January,1997
(i.V.Funk) (i.V.Lackhove)
Product Manager Project Manager
To Next Page
Loading...
Need help?
General
