This documentation is only valid for 9300 cam profilers as of version:
33.932X EK 2x 1x (9321 - 9329)
33.933X EK 2x 1x (9330 - 9332)
33.932X CK 2x 1x - V003 Cold Plate (9321 - 9328)
Type
Desgin:
Ex = Built-in unit IP20
Cx = Cold Plate
xK = Cam profiler
xP= Positioning controller
xR= Register controller
xS = Servo inverter
Hardware level and index
Software level and index
Va ria nt
Explanation
.
1998 Lenze GmbH & Co KG
Without written approval of Lenze Lenze GmbH &Co KG no part of these Instructions must be copied or given to third parties.
AllindicationsgivenintheseOperatinginstructionshavebeenselectedcarefullyandcomplywiththehardwareandsoftwaredescribed.Nevertheless,devia-
tions cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur. Required correctionswill be made in the
following editions.
Version 2.0 03/99
To Next Page
Loading...