Lenze EZAMBHXX028 - Mechanical Installation; Preparation

Mechanical installaon
DANGER!
Dangerous electrical voltage
Possible consequences: Death or severe injuries from electric shock
▶
Any work on the device must only be carried out in a deenergized state.
▶
Aer switching o the mains voltage, observe the signs on the product.
Preparaon
A maximum of three elements with 22 mm drill diameter can be mounted in the extension box. For
three elements, use the center drilling posion and the two outer drilling posions.
1.
Remove the cover of the extension box.
2.
Prepare holes:
•
It is recommended to use a step drill and a le for this work.
•
Prepare the required holes at the appropriate posions according to the following gure:
22 mm / 0.87 in
3 mm / 0.12 in
1 mm / 0.05 in
Mechanical installaon
Preparaon
14