Lenze g500-B - Information on Mechanical Installation

Commissioning
You have two opons to adapt the Lenze Smart Motor to the applicaons:
Precondions
NFC-capable smartphone or tablet
•
Android version from V3.0
•
Lenze app "Lenze Smart Motor"
-
Download from www.Lenze.com or from
the Google store
•
Deenergize motor
•
In order to ensure a trouble-free near eld
communicaon, nd out rst about the posion
of the NFC antenna on your mobile device
-
Possibly, this area is directly marked on your
mobile device.
-
The standard smartphones are marked in
the camera area.
•
Comply with the distance of < 2 cm when
reading/wring
PC
•
Engineering tool EASY Starter
-
Download from www.Lenze.com
•
Required licence:
-
EASY Advanced or Engineer HighLevel
•
EZAETF001 NFC adapter for communicaon
between PC and the Lenze Smart Motor
•
Deenergize motor
•
Comply with the distance of < 2 cm when
reading/wring
Parameter set management
Parameter Value Comment
Designaon Delivery Seng range
PIN --- [0000 ... 9999] PIN for the protecon against unauthorised
alteraon of the parameter set (0 = no protecon).
Alteraon of "PIN" sets "new PIN" to the same
value.
The parameters can also be read without a PIN.
New PIN --- [0000 ... 9999] Future PIN for protecon against unauthorised
alteraon of the parameter set.
Commissioning
42