Lenze g500-B - Technical Data

Device data
Parameter Value Comment
Designaon Delivery Seng range
Material number depending on the order [number] Drive idencaon
Device types [Text]
Firmware version [Text]
Hardware Version [Text]
Motor [Text]
Gearboxes [Text]
Rao [number]
Brake [Text]
Serial number [Text]
Acvang speeds
Output speed Acvate output speed
Parameter Value Direcon of rotaon X1.4 (DI1) X1.2 (DI2) X2.2 (DI3)
Designaon Delivery Seng range CCW rotaon Stop CW rotaon
1 --- [number] < 0 rpm 0 rpm > 0 rpm LOW LOW LOW
2 --- [number] HIGH LOW LOW
3 --- [number] LOW HIGH LOW
4 --- [number] HIGH HIGH LOW
5 --- [number] LOW/HIGH LOW/HIGH HIGH
Status message
X2.4 (DO1) Status
LOW Not ready for operaon
HIGH Ready for operaon
Commissioning
44