Lenze g500 - 3 Product Description; Important Notes; Description of Individual Components

Product description
Important notes
3
22
Lenze ¯ MA 12.0022 ¯ 2.0
3 Product description
3.1 Important notes
¯ The most important technical data are given on the nameplate or in the product
catalogues.
3.2 Description of individual components
2
3
4
1
5
Fig. 1 Description of the components
1 Gearbox 4 Retaining clip
2 Motor 5 Securing cams
3 Securing screw
For a drive−end motor interface, the g500 gearbox series is provided with a quadruple
central thread. The thread is a normal right−hand screw thread, i.e. to be tightened
clockwise and to be loosened counter−clockwise. The thread is tightened and locked by
means of a retaining clip and a tangential screw.
 Note!
In the case of the AC motor with motor frame size 063 as well as in the
case of MCS servo motors 06 and 09, the retaining clip has an angled
form.
3
4
Fig. 2 Angled retaining clip