Lenze g500 - Page 118

Commissioning
You have two opons to adapt the Lenze Smart Motor to the applicaons:
Tool Precondions
NFC-capable smartphone or
tablet
•
Android version from V3.0
•
Lenze app "Lenze Smart Motor"
-
Download from www.Lenze.com or
from the Google store
•
Deenergise the motor
•
In order to ensure a trouble-free near
eld communicaon, nd out rst about
the posion of the NFC antenna on your
mobile device
-
Possibly, this area is directly marked on
your mobile device.
-
The standard smartphones are marked
in the camera area.
•
Comply with the distance of < 2 cm when
reading/wring
PC
•
Engineering tool EASY Starter
-
Download from www.Lenze.com
•
Required licence:
-
EASY Advanced or Engineer HighLevel
•
EZAETF001 NFC adapter for communica-
on between PC and the Lenze Smart
Motor
•
Deenergise the motor
•
Comply with the distance of < 2 cm when
reading/wring
Parameter set management
Parameter Value Comment
Designaon Delivery Seng range
PIN [0000 ... 9999] PIN for the protecon against unauthorised
alteraon of the parameter set (0 = no pro-
tecon).
Alteraon of "PIN" sets "new PIN" to the
same value.
The parameters can also be read without a
PIN.
New PIN [0000 ... 9999] Future PIN for protecon against unauthor-
ised alteraon of the parameter set.
Commissioning
58