Lenze GSS Series User Manual

Maintenance
Maintenance operations
Lubricate roller bearings
8
58
Lenze • BA 12.0023 • 9.0
8.2.2 Lubricate roller bearings
The roller bearings on motors and gearboxes from Lenze are filled with the greases
listed below:
Ambient temperature Manufacturer Type
Gearboxrollerbearing
GST, GFL, GKS, GKR, GKL
-30 °C ... +50 °C
-30 °C ... +80 °C
-40 °C ... +60 °C
Fuchs
Klüber
Klüber
Renolit H 443
Petamo 133 N
Microlube GHY 72
Gearboxrollerbearing
GSS
-30 °C ... +80 °C
-15 °C ... +60 °C
Klüber
Klüber
Petamo GHY 133 N
Klüberplex BE 11-462
Motorrollerbearing
-30 °C ... +70 °C
-40 °C ... +80 °C
Lubcon
Klüber
Thermoplex 2TML
Asonic GHY 72
Special grease for gearbox roller bearings
Low-temperature oils,
observe critical starting
performance at low
temperatures
-40 °C ... +80 °C Klüber Asonic GHY 72
Biopetroleum (lubricant
for forestry, agriculture
and water supply and
distribution)
-40 °C ... +50 °C Fuchs Plantogel 0120S
The following lubricant quantities are required:
• For fast-running bearings (motor and drive end of gearbox): fill approx. one-third
of the hollow space between rolling bodies with grease.
• For slow-running bearings (in gearbox and driven side of gearbox): fill approx.
two-thirds of the hollow space between roller bearings with grease.

Lenze GSS Series Specifications

General

Brand	Lenze
Model	GSS Series
Category	Engine
Language	English