To Next PageTo Next Page
Need help?Do you have a question about the Lenze HighLine E94AMHE0024 and is the answer not in the manual?
General safety and application notes for Lenze controllers including directives and application.
Details on special controller variants supporting safety functions like 'safe torque off'.
Information regarding maintenance requirements and cleaning of controllers.
Guidelines for recycling and professional disposal of electronic components.
Provides general data, supply system, standards, protection, and environmental conditions.
Details input data including voltage, frequency, and current for various device types.
Guidelines for selecting and installing shielded and unshielded cables for optimal effectiveness.
Details terminal assignments and connections for the onboard system bus CAN.
Specifies connections and terminal data for the 24 V supply.
Details terminal assignments and connections for analog inputs and outputs.
Provides terminal assignments and connection details for digital outputs.
Details terminal assignments and connection information for digital inputs.
Information on the internal interface for keypad or diagnostic adapter.
Details terminal assignments for resolver connections.
Provides terminal assignments and descriptions for encoder connections.
Overview of communication modules, focusing on Ethernet connection and status indicators.
Details the E94AYCCA communication module for CANopen, including connections and pin assignments.
Explains the DIP switch for addressing the bus node and setting the baud rate.
Covers the E94AYCPM communication module for PROFIBUS, including connections and pin assignments.
Details the E94AYFLF function module for digital frequency, including connections and pin assignments.
Introduces MM1xx memory modules, specifying 1 MB flash memory equipment.
Describes MM2xx, MM3xx, and MM4xx memory modules with their respective flash memory, RAM, and clock features.
Explains DIP switches on memory modules for setting node address and baud rate.
Overview of safety modules, highlighting the SMO module's function and limitations.
Details the SM100 safety module, its 'Safe torque off' function, connections, and displays.
Describes the SM300 safety module's functions (STO, SS1) and installation safety precautions.
Explains PROFIsafe target address setting using DIP switches for unambiguous node communication.
Details terminal assignments for SM300 safety module, covering connections X82.1 and X82.2.
Details terminal assignments for SM300 safety module, covering connections X82.3 and X82.4.
Explains the status indicators (displays) for safety modules like MS, EN, ME, PS, DE.
Lists requirements for commissioning, including PC software, connection interfaces, and power supplies.
General
