Need help?Do you have a question about the Lenze 8400 HighLine C and is the answer not in the manual?
Provides essential safety measures for handling, installation, and operation of Lenze controllers.
Covers safety aspects for Lenze motors regarding installation, electrical connection, and operation.
Details potential residual hazards related to power terminals, device protection, motor protection, and parameter set transfer.
Covers conformity, approval, protection types, insulation resistance, leakage current, mains switching, and environmental conditions.
Provides input data, output data, power losses, and rated data for internal brake choppers across various models.
Explains controller current limits, derating curves based on switching frequency and mains voltage.
Details controller behavior during overcurrent operation, including utilization cycles and monitoring functions.
Describes assembly in built-in, push-through, and cold plate techniques for standard devices up to 3 kW.
Details mounting variants for built-in, push-through, and cold plate techniques for devices from 3 kW to 22 kW.
Covers assembly in built-in and cold plate techniques for standard devices in the 30 kW to 45 kW power range.
Details EMC requirements, design of cables, shielding, mains connection, motor cable, control cables, and wiring.
Provides example circuits and terminal assignment for power connections for devices in the 0.25-2.2 kW range.
Lists checks required before switching on the mains voltage and setting drive parameters.
Explains the importance of functional safety and drive-based safety with STO for person protection.
Covers application as directed, danger of improper installation, and STO function implications.
Details the Safe Torque Off (STO) function, its operation, and requirements for safe disconnection.
To Next Page
General