Lenze 8400 HighLine C - Overview of Control Terminals

Product description
Overview of control terminals
3
l
23
EDS84ASC552 EN 8.1
3.3 Overview of control terminals
Control terminals for devices in the StateLine version Control terminals for devices in the HighLine version
8400HLC080a 8400HLC081a
Connection Information
Pos. Description StateLine C HighLine C
X1 CANopen connection
^ 206
S1
CANopen settings
X3 Analog inputs/outputs; 10V reference voltage ^ 216 ^ 222
X4
Digital inputs; controller enable
^ 225
−
24 V supply of the control electronics
Digital outputs
^ 225
24 V voltage output
X5
Digital inputs; controller enable
− ^ 224
External 24V supply of the control electronics; internal 24V supply
fused via PTC
X6 (DIAG) Diagnostic interface ^ 214
X107
24 V brake supply;
− ^ 227
+ BD1
Connection for DC brake coil
− BD2
MMI Slot for memory module (Memory Module Interface) ^ 275
2 Icon Description
{
Long discharge time: All power terminals remain live for a few minutes after mains
disconnection! The duration is given under the warning symbol on the device.
}
High leakage current: Carry out fixed installation and PE connection according to EN 61800−5−1!
'
Electrostatic sensitive devices: Before working on the device, the personnel must be free of
electrostatic charge!
|
Hot surface: Risk of burns! Hot surfaces should not be touched without wearing protective
gloves.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com