Electrical installation
StateLine C control terminals
External supply voltage 24 V
6
l
215
EDS84ASC552 EN 8.1
6.7 StateLine C control terminals
6.7.1 External supply voltage 24 V
X4
24 V int.
50 mA
24EDI1
DI2
DI3
DI4 RFR
DC 24 V
(+19.2...
+28.8 V)
S1
3.3k
X4
GND-IO
DO1GIO
24I
GND-IO
3.3k
3.3k
3.3k
3.3k
50 mA
8400SLC044 8400SLC045
Fig. 6−31 Connection to an external supply voltage
Labelling Description
24E Connection for an external 24 V supply by a safely separated power supply
unit (SELV/PELV), IEC 61131−2
(required for mains−independent supply of the control electronics and the communication
module)
24I Output 24 V, max. 50 mA
for connection of the digital inputs via potential−free contacts
GIO GND−IO Ground reference potential for the digital inputs and outputs
Terminal data
Conductor cross−section Tightening torque
!
[mm
2
] [AWG] [Nm] [lb−in]
Flexible
0.2 ... 1.5
24 ... 16 − − −
With wire end ferrule
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
