Electrical installation
HighLine C control terminals
External supply voltage 24 V
6
l
221
EDS84ASC552 EN 8.1
X4
24O
DC 24 V
(+19.2...+28.8 V)
X4 DO1DO2
DO3
GO
GND-O
8400HLC035 8400HLC045
Fig. 6−37 Connection to an external supply voltage
Labelling Description
24O Connection for an external 24 V supply by a safely separated power supply
unit (SELV/PELV), IEC 61131−2
(required for the supply of the digital outputs)
GO GND−O Ground reference potential for the digital outputs
Terminal data
Conductor cross−section Tightening torque
!
[mm
2
] [AWG] [Nm] [lb−in]
Flexible
0.2 ... 1.5
24 ... 16 − − −
With wire end ferrule
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
