Lenze 8400 HighLine C

Mechanical installation
Standard devices in a power range of 0.25 ... 3 kW
Mounting in "cold plate" technique
5
l
103
EDS84ASC552 EN 8.1
Ambient conditions
ƒ The rated data and the derating factors at increased temperature also apply to the
ambient temperature of the drive controllers.
ƒ Temperature at the cooling plate of the drive controller: max. 75 °C.
) Note!
Apply standard heat−conducting paste or heat−conducting foil onto cooler and
cooling plate before you bolt the controller onto the cooler.
StateLine, HighLine
8400GG105c
Fig. 5−11 Device dimensions
h b t h
1
h
2
b
1
t
1
g
1
g
2
[kW] [mm]
E84AVxxC2512xX0
0.25
165 102 185 186 226 70 172 6 5
E84AVxxC3712xX0
0.37
E84AVxxC3714xX0
0.37
215 102 163 236 276 70 150 6 5
E84AVxxC551xxX0
0.55
E84AVxxC751xxX0
0.75
E84AVxxC112xxX0
1.1
270 137 163 295 335 70 150 6 5
E84AVxxC152xxX0
1.5
E84AVxxC222xxX0
2.2
E84AVxxC2512xB0
0.25
165 102 205 186 226 70 192 6 5
E84AVxxC3712xB0
0.37
E84AVxxC3714xB0
0.37
215 102 183 236 276 70 170 6 5
E84AVxxC551xxB0
0.55
E84AVxxC751xxB0
0.75
E84AVxxC112xxB0
1.1
270 137 183 295 335 70 170 6 5
E84AVxxC152xxB0
1.5
E84AVxxC222xxB0
2.2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com