Product description
Device features
3
l
19
EDS84ASC552 EN 8.1
3 Product description
3.1 Device features
Version
Features
StateLine C HighLine C TopLine C
Power range from 250 W to 45 kW
Communication and diagnostic interfaces
Integrated interference suppression acc. to EN 61800−3
Integrated DC−bus connection for devices with 400 V
mains connection
Flying restart circuit
Integrated brake management
Integrated brake chopper
Optionally: Integrated safety system "Safe torque off
(STO)"
Operating modes:
VFCplus: V/f open loop control, linear and quadratic
VFCplus: Freely definable characteristic
VFCplus eco: Energy−efficient V/f characteristic −
SLVC: Sensorless vector control (torque / speed)
VFCplus: V/f closed loop control for speed−controlled
applications
SC: Servo control ASM (torque / speed) −
SC: Servo control PSM (torque / speed) −
SL PSM: Sensorless synchronous control (torque /
speed)
−
S−shaped ramps for almost jerk−free acceleration and
deceleration
200 % overload current (3 s)
IT system usability
Protection against restart for cyclic mains switching
CANopen baud rate Up to
1000 kbps
Up to 1000 kbps
Up to 1000 kbps
Speed feedback
Incremental HTL encoder
Evaluation: Single−track / two−track
10 kHz
10 kHz and
200 kHz
10 kHz and
200 kHz
Incremental TTL encoder − −
SSI − −
1 V
SS
sin/cos encoder − −
1 V
SS
sin/cos absolute value encoder (Hiperface) − −
Applications
Actuating drive
Table positioning −
Switch−off positioning
Touch probe −
Axis bus − −
Digital frequency coupling − −
Digital 2.5 A output with integrated spark suppressor,
e.g. for the direct control of a 24 V motor holding brake
−
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
