Lenze 8400 HighLine C - Installation According to EMC (Installation of a CE-Typical Drive System); Shielding

Electrical installation
Installation according to EMC (installation of a CE−typical drive system)
Wiring outside of the control cabinet
6
l
168
EDS84ASC552 EN 8.1
6.2.6 Wiring outside of the control cabinet
Notes for cable routing outside the control cabinet:
ƒ The longer the cables the greater the space between the cables must be.
ƒ If cables for different signal types are routed in parallel, the interferences can be
minimized by means of a metal barrier or separated cable ducts.
Cover
Barrier without
opening
Power cables
Signal cables
EMVallg001
Fig. 6−6 Cable routing in the cable duct with barrier
Cover
Communication cables
Cable duct
Measuring cables
Analog cables
Control cables
Power cables
EMVallg002
Fig. 6−7 Cable routing in separated cable ducts
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com