Product description
Overview of control terminals
3
l
24
EDS84ASC552 EN 8.1
Control terminals for devices in the TopLine version
8400TLC032b
Connection Information
Pos. Description TopLine C
X1 CANopen connection
^ 206
S1
CANopen settings
Settings for CANopen terminating resistor and axis bus
X3 Analog inputs / outputs; 10 V reference voltage ^ 222
X4
Digital inputs; controller enable
−
24 V supply of the control electronics
Digital outputs
^ 225
^ 225
24 V voltage output
X5
Digital inputs; controller enable
^ 224
External 24 V supply of the control electronics; internal 24 V supply, fused
via PTC
X6 (DIAG) Diagnostic interface ^ 214
X7 Resolver ^ 228
X8 Encoder ^ 229
X10 Axis bus ^ 230
X107
24 V brake supply
^ 227
+ BD1
Connection for DC brake coil
− BD2
MMI Slot for memory module (Memory Module Interface) ^ 275
2 Icon Description
{
Long discharge time: All power terminals remain live for a few minutes after mains
disconnection! The duration is given under the warning symbol on the device.
}
High leakage current: Carry out fixed installation and PE connection according to EN 61800−5−1!
'
Electrostatic sensitive devices: Before working on the device, the personnel must be free of
electrostatic charge!
|
Hot surface: Risk of burns! Hot surfaces should not be touched without wearing protective
gloves.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
