Lenze I51AE175B - Page 102

Parameter Name / value range / [default seng] Info
0x2601:003
(P202.03)
Keypad setpoints: Torque setpoint
(Keypad setpoints: KP torq.setpoint)
-400.0 ... [100.0] ... 400.0 %
•
From version 03.00
Default seng of the keypad setpoint for the operang mode 0x6060
(P301.00) = "MS: Torque mode [-1]".
•
100 % ≡ Motor rated torque 0x6076 (P325.00)
The increment for keypad setpoints can be adapted in 0x2862 (P701.00) by pressing a keypad
arrow key once.
Basic seng
Selecon of setpoint source
Keypad setpoint default seng
102