Lenze I51AE175B - Default Chapter; Table of Contents

Contents
1 General informaon 11
1.1 Read rst, then start 11
2 Safety instrucons 12
2.1 Basic safety measures 12
2.2 Residual hazards 13
2.3 Applicaon as directed 13
3 Mechanical installaon 14
3.1 Dimensions 14
4 Electrical installaon 17
4.1 Important notes 17
4.2 Mains connecon 18
4.2.1 1-phase mains connecon 230/240 V 18
4.2.1.1 Connecon plan 18
4.2.1.2 Fusing and terminal data 20
4.2.2 3-phase mains connecon 230/240 V 23
4.2.2.1 Connecon plan 23
4.2.2.2 Fusing and terminal data 24
4.2.3 3-phase mains connecon 400 V 26
4.2.3.1 Connecon plan 26
4.2.3.2 Fusing and terminal data 27
4.2.4 3-phase mains connecon 480 V 30
4.2.4.1 Connecon plan 30
4.2.4.2 Fusing and terminal data 31
4.3 Control connecons 33
4.4 Networks 33
4.4.1 CANopen/Modbus RTU 33
5 Commissioning 34
5.1 Important notes 34
5.2 Operang interfaces 35
5.2.1 Keypad 35
5.2.2 Engineering tool »EASY Starter« 36
5.2.2.1 Generate a connecon between inverter and »EASY Starter« 37
5.3 Parameter seng 39
5.3.1 General notes on parameters 40
5.3.2 Basic inverter sengs 41
5.3.3 Basic motor sengs 44
5.3.4 Funcon assignment of the inputs and outputs 45
5.4 Keypad parameter list 48
5.5 Save parameter sengs in the memory module 66
5.5.1 Save parameter sengs with keypad 66
5.5.2 Save parameter sengs with »EASY Starter« 66
Contents
3