Lenze I51AE175B - Generate a Connection between Inverter and EASY Starter

5.2.2.1 Generate a connecon between inverter and »EASY Starter«
For commissioning the inverter with the »EASY Starter«, a communicaon link with the inver-
ter is required. This can be established in a wired or wireless manner via WLAN.
Precondions
•
For the wired communicaon with the inverter, the USB module and a USB 2.0 cable (A
plug on Micro-B plug) are required.
•
For the wireless
communicaon with the inverter, the WLAN module is required. More-
over, the PC on which the »EASY Starter« is installed must be wireless-enabled.
Commissioning
Operang interfaces
Engineering tool »EASY Starter«
37