DMS 1.3 EN - 02/2011 L 25
Control technology| System manual
System description
System components
4.1.2 Field devices
The following field devices can be used within the scope of the PC based automation. De-
pending on the bus system used, a device series may be applicable in a restricted way. For
details see Network topologies
( 32)
4.1.2.1 Operation on the MotionBus
The MotionBus can drive controllers which support the standardised device profile DS402.
These are the following devices:
Controller
– Servo Drives 9400
– ECS servo system (motion device version with CiA 402 )
4.1.2.2 Operation on the fieldbus (Logic)
The fieldbus (Logic) can drive all field devices which have a suitable device description file.
The system is optimised for the following device series:
Controller
– 9400 Servo Drives Highline
– ECS servo system, device versions Speed and Torque, Posi and Shaft,
Application)
– 8400 Inverter Drives
Further field devices
– I/O system 1000
– I/O system IP20 compact/modular
– HMI series EL100
– HMI series EPM-Hx
To Next Page
Loading...
