DMS 1.3 EN - 02/2011 L 27
Control technology| System manual
System description
System components
4.1.3.2 »PLC Designer«
You need the »PLC Designer« for
creating the control program for the IPC,
transferring the PLC projects to the IPC.
Basic functions of the »PLC Designer«:
Programming of Logic & Motion according to IEC 61131-3:
– Instruction list (IL),
– Ladder diagram (LD),
– Function plan (FP),
– Structured text (ST),
– Sequential function chart (SFC),
– Function block diagram (FBD).
Certified function blocks according to PLCopen Part 1 + 2,
NC module library,
Graphic DIN 66025 Editor (G code) with DXF import,
cam editor.
4.1.3.3 Web-based parameterisation
The »WebConfig« is an engineering tool for web-based parameter setting of Industrial PCs.
Functions of the »WebConfig«:
Configuration and diagnostics of the Industrial PCs in the web browser by integrated
web server,
access to all IPC parameters,
access to an integrated IPC logbook.
To Next Page
Loading...
Need help?
General
