4
KFZ_Zeichen_EN−M−Install_WiHis_Panel_Controller
Lenze ¯ MA_p300 ¯ 7.0
¸
, Please read these instructions and the controller reference manual before you
start working.
Observe the provided safety instructions!
I Tipp!
Information and tools concerning the Lenze products can be found in the
download area at
www.lenze.com
These instructions are valid for:
Panel Controller/HMI p300: P30GA x x 0300F3G x XXX−02S3C X 14 x 00
Version
P = Panel Controller
H = HMI
Screen diagonal
8 = 10.9 cm (4.3")
9 = 17.8 cm (7.0")
4 = 26.4 cm (10.4")
Optional interface
0 = none
8 = PROFINET
Approvals
0 = UL type rating 4X
1 = UL type rating 1
( Stop!
Depending on the system, sporadic cycle time extensions beyond the set cycle
time or jitters may occur.
Especially the use of the engineering tools »EASY Starter« , »Engineer« ,
»WebConfig« and an online change or data access may cause such a cycle time
extension and may only be effected in a machine−safe state.
To Next Page
Loading...
