Letscom 8UI - Using the Headphones; Charge the Headphones

LED Indicator Guide
● Rapidly flashing red and blue alternately: Pairing mode
● Flashing red once every 6-8 seconds: Low battery
● Flashing blue once every 6-8 seconds: Paired
● Flashing blue twice every 6-8 seconds: Powered on but
not paired
● Rapidly flashing red 3 times: Powered off
● Steady red: Charging
● Steady blue: Fully charged
1. Charge the headphones
1) Open the hinged door on the bottom of the right
earphone.
2) Plug the small end of the USB cable into the
Micro USB port of the headphones.
3) Plug the other end into a USB wall charger or
computer (DC 5V) that is powered on.
Notes:
● Fully charge the headphones before using them
for the first time.
● The indicator is red during charge.
● The indicator turns blue when the headphones
are fully charged.
● The indicator flashes red and a voice reminder
prompts when the headphones are in low battery.
Using the HeadphonesC
-3-