Letscom 8UI - Connect to Two Bluetooth Devices

Notes:
● The headphones will directly enter pairing mode
the first time you turn them on. To enter the pair
mode later, follow the steps above.
● The headphones will connect to the last paired
Bluetooth device automatically when they are
turned on. Please turn on the Bluetooth of your
Bluetooth device before turning on the
headphones.
● When the headphones are on but was not paired
with your phone or other Bluetooth devices, they
will exit the pairing mode in 1 minute (to enter
pairing mode again, turn off the headphones and
turn them on again) and be automatically off in
about 5 minutes (to enter pairing mode again,
turn on the headphones).
4. Connect to two Bluetooth devices at
the same time
1) Pair the headphones with the first phone.
2) After a successful pairing, turn off the
headphones and the Bluetooth of the first
phone.
-6-