To Next Page

To Previous Page

from other potential targets in the distance behind the pin. The GX-1i and

GX-2i series rangefinders feature PinHunter Laser Technology, which will always

provide you the distance measurement to the closet object ranged. When you

press and hold the MODE button for 1 second then release it, the Quick Set

is prepared for navigation. To set or activate a mode, you must advance

to that function by pressing the MODE button until that function is displayed.

To activate a mode, press the POWER button, the icon will display steadily and

the word “On” will appear in the bottom portion of the display. Pressing the

POWER button again will turn that mode off; displaying the word “OFF” in the

bottom portion of the display. Each subsequent depression of the POWER but-

ton will toggle that function between on and off. If this is the last mode to be

set, allowing the rangefinder to sit idle for 20 seconds will cause an automatic

power-off, saving all selections. If additional modes require activation/deactiva-

tion, simply press MODE to continue through the Quick Set Menu.

Leupold GX 1i User Manual

Questions and Answers: