39
2
3
4
5
6
7
8
9
P
TGR is available on GX-2i models only. GX-1i models will only display LOS
FUNCTION 8: YARDS/METERS OUTPUT
3) Press and release MODE until the word Unit is shown in the
upper display.
4) While the word Unit is shown in the upper display, press and release
POWER as necessary to toggle between yards and meters, which will be
This mode allows you to toggle between yards or
meters for the measurement output unit. TGR is dis-
played in large numbers just above the reticle; LOS is
displayed in small numbers below and to the right of
the reticle (above the angle readout). Press POWER to
toggle between yards or meters. Press MODE to save
your selection and move to the next function.
To Next Page
Loading...
Need help?
General
