22
3) Verify that TGR is turned on; if TGR is not activated, you will not be able
to enter the current temperature or altitude. To activate TGR, see “How
do I activate TGR?” (page 17).
4) Press and release Mode; the last saved current temperature will now
be flashing. Press and release MODE again and the last saved current
altitude will be flashing.
5) While the altitude is flashing, press and release POWER to change the
current altitude setting to match current conditions; each depression of
POWER will increase the altitude setting by 500 feet until 9999 has been
reached, at which time the setting will return to 0 and begin increasing
again.
6) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or simply
press and hold MODE for at least 1 second. To continue through the
Quick Set Menu and manipulate another feature, press and release
MODE until the appropriate icon is displayed.
To Next Page
Loading...
Need help?
General
