30
4) Press and release MODE to input the current temperature and altitude
as described on pages 19-22.
5) Press and release MODE again to progress until the Club Selector icon is
shown on the left side of the display.
6) While the Club Selector icon is displayed, press and release POWER as
necessary until the word “On” is displayed in the lower portion of the
display.
7) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or simply
press and hold MODE for at least 1 second. To continue through the
Quick Set Menu and manipulate another feature, press and release
MODE until the appropriate icon is displayed.
NOTE:
If this is the first time that the Club Selector feature has been used, you
must continue and input the striking distance of your 8, 6, and 4-iron, as well
as the temperature and altitude at which these distances were measured.
The input information will be saved for future use. If this is not completed,
the GX-2i will use the default settings (130 yards for an 8-iron, 150 yards for
a 6-iron, and 170 yards for a 4-iron).
To Next Page
Loading...
Need help?
General
