25
3) The last saved altitude will be flashing in the
bottom portion of the display. If you wish to input
an altitude other than the one shown, proceed
to step 4. To save the shown altitude press and
hold MODE for at least 2 seconds. To continue
through the Quick Set Menu and manipulate
another function, press and release MODE until the
appropriate icon is displayed.
4) Press POWER to toggle through the altitude settings. The default setting is 1,000
feet. Pressing POWER will toggle through a range of 0 feet to 9,999 feet in 500 foot
increments.
When the appropriate altitude is displayed, press and release MODE to save the selec-
tion. The process for setting up the temperature and altitude at which the striking
distances were measured is complete. To return to ranging mode, press and hold MODE
for at least 2 seconds. To continue through the Quick Set Menu and manipulate another
function, press and release MODE until the appropriate icon is displayed.
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
